Wood Transportation Belts

Wood Transportation Belts

We have designed several belt models for the transportation of wood in all of its different states: logs, boards, and woodchips. The belts are resistant to vegetable oils and resins.We have used EP Polyester-Nylon fabrics in the design of these belts, with a differing number of plies, depending on the belt tension required in the system in question.

They are manufactured with special oil-resistant rubber, with the underside of the belt either covered in low-friction fabric or a special, 1mm thick, low-friction, grey rubber. This type of compound has been designed to help the belt slide over the underlying table and helps protect the lower fabric layer from wear and tear.

The belts are manufactured in widths up to 2000 mm, with cut edges for belts with low-friction fabric. Belts with underside coatings may have sealed or cut edges, depending on the requirements of the customer.

For the transportation of woodchips along gradients, we recommend the use of the multi-ribbed belt, with grade G characteristics of moderate oil resistance. This belt is manufactured with a width of 1800 mm, with a low-friction black or grey rubber underside coating, or with no cover and the fabric left directly visible.

 

For more information and buy equipments , kindly contact sales department.